Link Pillars
In response to demand from utilities Australia wide Weber has developed a range of link pillars. Each utilities’ requirements for switching capacity, switching arrangement, services connection and current rating has been considered in this range
General Description
The Weber three-way link pillar is a three-way linking pillar design for URD and UCD electricity networks rated up to 400A. It has been designed to offer utilities greater switching flexibility by allowing isolation and connection of up to three network cables which can be switched under full load. The Weber three-way link pillar unique design has the added benefit of being able to connect any network cable to the services or fully isolate all services from the network as required.
Product Range
| Item Number | Description | Fused Services | Unfused Services | Generator Connection |
|---|---|---|---|---|
| VP2630-CE01 | TWO WAY LINK PILLAR | 2 | 6 | YES |
| PA0432F0FC-001 | THREE WAY LINK PILLAR | 2 | 6 | YES |
| PA0438N0FC-002 | THREE WAY LINK PILLAR LIFT OFF COVER | 0 | 8 | YES |
| PA0438N0FC-001 | THREE WAY LINK PILLAR IN CABINET | 0 | 8 | NO |
| PA0422F0FC001K2 | RETROFIT DISCONNECTOR FOR FITTING TO PA0422F0FC-001 |
Single line diagram (PA0432F0FC-001)
Switching arrangements
Connectivity
| NETWORK CABLE CONNECTION | 240mm2 AL |
| UNFUSED SERVICES CABLE CONNECTION | 6mm2 TO 70mm2 CU |
| FUSED SERVICES CABLE CONNECTION | 35mm2 |
Accessory
LOCK OUT FACILITY
Manufactured Products
How to contact us
Phone
07 3841 6899
Fax
07 3841 6877
18 McKechnie Drive
Brisbane Technology Park
PO Box 4264, Eight Mile Plains
Brisbane Queensland,
4113 Australia