Link Pillars

In response to demand from utilities Australia wide Weber has developed a range of link pillars. Each utilities’ requirements for switching capacity, switching arrangement, services connection and current rating has been considered in this range

General Description

The Weber three-way link pillar is a three-way linking pillar design for URD and UCD electricity networks rated up to 400A. It has been designed to offer utilities greater switching flexibility by allowing isolation and connection of up to three network cables which can be switched under full load.  The Weber three-way link pillar unique design has the added benefit of being able to connect any network cable to the services or fully isolate all services from the network as required. 

Product Range

Item Number Description Fused Services Unfused Services Generator Connection
VP2630-CE01 TWO WAY LINK PILLAR 2 6 YES
PA0432F0FC-001 THREE WAY LINK PILLAR 2 6 YES
PA0438N0FC-002 THREE WAY LINK PILLAR LIFT OFF COVER 0 8 YES
PA0438N0FC-001 THREE WAY LINK PILLAR IN CABINET 0 8 NO
PA0422F0FC001K2 RETROFIT DISCONNECTOR FOR FITTING TO PA0422F0FC-001

Single line diagram (PA0432F0FC-001)

Switching arrangements

  Connectivity

NETWORK CABLE CONNECTION 240mm2 AL
UNFUSED SERVICES CABLE CONNECTION 6mm2 TO 70mm2 CU
FUSED SERVICES CABLE CONNECTION 35mm2

Accessory

LOCK OUT FACILITY

Manufactured Products

Pillars
LV Assemblies - Padmount
LV Assemblies - Chamber Substations
Secondary Systems for Zone Substations

How to contact us

Phone
07 3841 6899

Fax
07 3841 6877

18 McKechnie Drive
Brisbane Technology Park

     

PO Box 4264, Eight Mile Plains
Brisbane Queensland,
4113 Australia

Contact Us